Nie-Tech Co., Ltd. >> Z-Wave Two Beams Active Infrared Sensor for Perimeter Security (ZW113)
Z-Wave Two Beams Active Infrared Sensor for Perimeter Security (ZW113)
| Price: |
US $ 28-49/Piece |
| Min Order: |
1/Piece |
| Pay Type: |
L/C,T/T,D/P,Western Union,Paypal |
| Prod Model: |
ZW113 |
| Detection Type: |
Injection |
| Detection Angle: |
180deg+/-90(Horizontal); 20deg+/-10deg(Vertical) |
| Operating Temp: |
-25oc~55oc |
| Dimensions: |
171(L)*50(W)*77(H)mm |
| Frequency: |
868.42MHz/908.42MHz/919.82MHz/921.42MHz |
| Microwave Sensorswitch: |
Resistive |
| Function Type: |
Infrared Range and Communication System |
| Detection Range: |
30~100meter |
| Range: |
30m Line of Sight |
| Power Supplier: |
12VDC |
Product Description
Product Description
Z-wave Two Beams Active Infrared Sensor for Perimeter Security (ZW113) Introduction This sensor is a Z-Wave enabled device (interoperable, two-way RF mesh networking technology) and is fully compatible with any Z-Wave enabled network.
Technical data | Detection range | 30~100meter; |
| Detection angle | 180°±90°(horizontal); 20°±10°(vertical) |
| Power supply | 12VDC |
| Range | 30m line of sight |
| Operating temp | -25°--+55°(ºC) |
| Quiescent current | 18(uA) |
| Alarm current | 100(uA) |
| Dimensions | 171(L)*50(W)*77(H)mm |
| Frequency | 868.42MHz/865.2MHz/869.0MHz/908.42MHz/921.42MHz |
Installation
1. Release cover tab to open the cover.
2. Install ZW113 to the relate position, avoid obstacles such as trees, insure the set-base is stable, and avoid sunshine/lamplight directly shining.
3. Close the cover back to sensor.
4. For "Add" in (adding to): Put the Z-Wave Interface Controller into "Add" mode, and following its instruction to add the ZW113 to your controller. To get in the "Add" mode, the distance between sensor and controller is suggested to be in one meter. Press the learn switch of ZW113 once. The LED on the ZW113 should stop flashing, if not, please try again. For "Remove" from (removing from) a network: Put the Z-Wave Interface Controller into "Remove" mode, and following its instruction to delete the ZW113 to your controller. Press the learn switch of ZW113 once to be excluded. The LED on the ZW113 should start to flash. For "Group": removing the cover of the ZW113 to get into "Awake" mode, then put the Z-Wave Interface Controller into "Group", and following its instruction to associate the ZW113 with other device. Close the cover back after "Group" done, afterward the ZW113 will get into "Sleep" mode for power saving. Support one association group (5 nodes). Note: "Awake" mode: it is to leave the "Sleep" mode by removing the cover of ZW113, to allow the Z-Wave Interface Controller to do "Group.
5. Using gum wall plug & screws to mount ZW113 at 2 meters above surface. To enhance proper operation, place ZW113 on the angle which can detect the room widely. The solid area means the detector's coverage range.
Shipping &Packing
NIE-TECH Co., Ltd founded in 2009, is a Hi-tech manufacturer that specializes in smart-home products' design, development and manufacture.
We own the experienced and innovative R&D team, and has a full range of successful Z-Wave solution for both home and industrial applications. Our wide range of wireless technologies, which earned us great confidence from our customers for their reliability and range performance, help our customers turn their innovative ideas into successful products.
Our ZE300 Evalogik Gateway is the nerve centre of smart home. It allows you to gain access to and control different appliances and devices installed in your home by using your smartphone. ZE300 Evalogik gateway that can be remotely controlled range from lightings, sensors, curtain motors, security cameras and energy control units. All you need to do is configure the Gateway with your home's Wi-Fi network and install the EVALOGIK APP on your smartphone. You can then add and connect to all appliances compatible with the EVALOGIK gateway.
With the aim of "quality first, customer first", our QC team ensures the products are qualified before shipping. Low-cost, short leading time, high quality, and our rigorous working attitude, all of these are helping us to get more orders.
Anyhow, looking forward to cooperating with you as biz partner in any terms.
