Prod Model: |
Grin Lens |
IEC 61754-7 Compliant: |
Compact Design, up to 24 Fiber Ribbon |
Length: |
0.5m, 1m,2m or Customized |
Lens Diameter Tolerance: |
+0.005/-0.010 M |
Cable Jacket Color: |
Blue, Beige, Aqua, Black, Green, Yellow,Customized |
Transmission Medium: |
Multimode |
Structure: |
FC |
Number Of Cores: |
Multi-Core |
Ferrule Endface: |
APC/PC |
Shape: |
Round |
Brand: |
ODM |
Product Description
Product Description
Grin Lens is made of special glass material which make use of the continuous changed by radial of the refractive index, the working theory may be explained: An incoming light ray is first refracted along the high refractive index side, the refractive index of the lens center is highest, and refractive index (n) continuatively changed low with radial distance of lens. The light path will transfer as Sin. Curve when the light through the Grin Lens.
Grin Lens is an optical lens which use for optics collimation, optics focus and optical image transmission etc for this kind of characteristic. The application of Grin Lens' is the same as conventional lens, performance of the lens depends on a continuous change of the refractive index within the lens material, The simple geometry allows us a very cost-effective production and simplifies the assembly of product essentially, just Polish the two end surface and control the length, instead of complicated shaped surfaces plane optical surfaces are used for the conventional lens.
Since limited for the special assembly and working theory, the diameter of conventional lens is not very small, for example: Less than 1.0mm, at same time, it can't get the image in very close working distance, such as: In 5.0mm distance, However, the Grin Lens are fabricated down to 1.0mm in diameter and get the image in zero distance.
Grin Lens Applications
Isolator
Optic power Coupling
Collimator
Optic Switch
Minitype Optic System
Optic duplicating macline
Scanner
Electrograph
parameter | Item | Name | Specifications | Notes |
Optical Performance | Transmittance | β | >89% | WavelengthRange:380nm~2000nm |
Refractive Index | N. | 1.5906 | Test wavelength:1500nm |
Lens Effective Diameter | d | 60-70% lens diameter | For low loss and low aberration |
Index Gradient Constant | | 0.320 | Lens Diameter is 1.8mm |
Tolerance | ±0.75% | Within same ion exchange batch |
±2.5% | Between ion exchange batches |
Numerical Aperture | N.A | 0.46 | Lens Diameter is 1.8mm |
Pitch (transmission cycle) | P | 19.6349 | P=2π/ |
Machine Accuracy | Lens Diameter Tolerance | +0.005/-0.010 mm | |
Lens Length Tolerance | 0/-0.04 mm | Max machine and polishingtolerance |
2.5% Commonly Length | According to |
End Face Angle | 8°±0.5° | |
Ellipticity | 3μm | |
End Face Perpendicularity | 6mrad | |
Thermal Expansion Coefficient | 10X10- 6 /ºC | |
Others | Operating Temperature | 350ºC | Max operating temp. for lens material |
Humidity | 65%-85% HR | Store in desiccant to avoid moisture |
Surface Quality Standard: Inspected at 30X microscope:
Pinholes/Particles | Defects greater than 30μm in diameter are not allowed. |
Defects smaller than 10μm in diameter are allowed. |
Up to three defects with diameter between 10μm~, 30μmare allowed. |
Scratches | Scratches wider than 5μm are not allowed. |
Scratches narrower than 2μm are allowed. |
Up to three scratches with 5μm max. width and 200μm max length are allowed. |
Chips | Chips are not allowed within the concentric area of 90% of the lens diameter. |
End Face Planeness | 1/4λ(λ=6328nm) |
Ordering Information: GL -x-x-x-x
GL | Diameter(mm) | Pitch(P) | Wavelength(nm) | Coating | Angle |
05=0.5 10=1.0 18=1.8 | 023=0.23P 024=0.24P 0248=0.248P 025=0.25P | 85=850 13=1310 15=1550 125=1250~1650 126=1260~1620 | N=without AR-Coating
AR1=single end face AR-Coating
AR2=double end face AR-Coating
| 4D=single end face with 4 ° 6D=single end face with 6 ° 8D=single end face with 8 ° 0=double end face with 0 ° 8=double end face with 8 ° |
Shenzhen KOC Communication Co., Ltd. Is specialized in fiber optic communication product manufacture. Our products range from the basic components to end products, including passive and active categories as follows: Basic Components: Connector kits, Adapter kits, Attenuator kits.
Passive products: Connector, Adapter, Attenuator, Patch-cord, ODF and enclosure.
Active products: Media converter, Transmitting and receiving assemblies, such as laser diode assembly, PD and PIN/TIA assembly, sub-assemblies such as TOSA, ROSA, BOSA.
FTTH System: Gpon: OLT, ONU, PLC
Headquarter located in Shenzhen, China, we have branch companies, representatives and distributors in Europe, America, Middle East, South Asia. KOC products are well accepted and sold in these areas.
We provide all our products with high quality, competitive price, short delivery lead time and excellent after-sales services.
About KOC
Located in Shenzhen, China, KamaxOptic Communication Co. Ltd., well-known as KOC, is specialized in fiber optic communication products and accessories. She offers precise customized solutions for various customers involved in telecommunication, broadcast, CATV and network industry worldwide.
Our quality is guaranteed by the scientific management with the assistances of professional personnel, advanced testing equipments and efficient ERP system under the strict guidance of ISO9001: 2000, from supplier evaluation to inbound material examination, from processing monitoring to permanent inspection, from packing to shipping. We do care for every detail!
To be dedicated to be a popular manufacturer with her quality products, satisfactory services and attention to details through the full commitment of each personnel to work as one team in an effort to exceed our customer expectations.
To operate the business in a transparent and honest manner, that our customers, our associates and our business partners are proud to play their part in our success.
Please visit us website for more information: http://www.koc.com.cn